ATEX / IECEx Telemetry Strain Transmitter OEM Module (X24-SAe)

Description

ATEX / IECEx Telemetry Strain Transmitter OEM Module (X24-SAe)

ATEX/IECEx telemetry transmitter module measures strain input and periodically transmits data for receipt by X24 or T24 receivers. High accuracy ratio-metric input allows for calibration and linearisation for pressure, force and weight measurement in explosive atmospheres. In bare PCB module OEM format for building into equipment and projects.

  • Approved for use in explosive atmospheres Zone 1, Zone 2, Zone 21, Zone 22
  • Facilitates construction of certified load cells and products
  • 800 m (½ mile) range
  • Long battery life: 2 years at 12 sessions of 5 minutes per day; 30 days continuous
  • High accuracy, extremely low temperature drift
  • High resolution ratio-metric/bridge measurement
  • Up to 1 part in 400,000 (18.75 bits) noise free resolution
  • Bipolar input, up to ±3.2 mV/V
  • Calibration and linearisation to engineering units
  • Capable of driving 4 X 350 R load cells
  • Up to 200 Hz transmission rates
  • 5 V bridge excitation
  • Compatible with X24 receiver and T24 receivers
  • Efficient omnidirectional antenna removes requirement for external enclosure antenna
  • Environmentally sealed to IP67 in robust enclosure
  • Operating temperature range of -20 °C to +50 °C
  • 80 mm X 62 mm X 34 mm (Not including cable gland)
  • Uses readily available Energizer L91 batteries

ATEX / IECEx telemetry transmitter module measures strain input and periodically transmits data for receipt by X24 or T24 receivers. PCB module provides OEM sensor manufactures with a quick route to manufacture and supply approved strain bridge sensor products.
This intrinsically safe board is approved for both Gas Zone 1 and 2 and Dust Zones 21 and 22.
High accuracy ratio-metric input allows for calibration and linearisation for pressure, torque, force and weight measurement in explosive atmospheres.
The X24-SAe provides 5 V excitation to drive transducer loads down to 85 ohms. This transmitter is highly accurate, low noise and uses up to nine point linearisation giving quality measurements from a wide range of strain bridge transducers.
The OEM product X24-SAe has component approvals which allow holders of a QAN or a QAR to “fast track” the design and manufacture of their own ATEX/IECEx products through the equipment certification process using a notified body such as BASEFA, CSA group or UL.