Call Us Now! (03) 9874 email@example.com
Lightweight triaxial vibration transducer comprising three KONIC all welded inserts, each with hybrid QVC, bonded orthogonally into a hard anodised aluminium housing.
Lightweight triaxial vibration transducer comprising three KONIC all welded inserts, each with hybrid QVC, bonded orthogonally into a hard anodised aluminium housing. The inserts are electrically insulated, individually and from the housing, thus eliminating ground loop interference. Low impedance O/P provides a high degree of noise immunity (80dB improvement vs. equiv. charge source device @ 50Hz) and allows use with low cost coaxial cable. The additional mechanical isolation implicit in the construction provides also near elimination of strain induced error. All the 3×10/32 Microdot connectors are exiting in the same direction.
The spatial response of a structure to dynamic forcing, may lead to erroneous single axis vibration or shock measurement due to the inherent directional property of the transducer. In cases where this is deemed to be a problem, an orthogonal three axis measurement, allowing computation of absolute value and direction offers a solution.
The d33 component suppression property of the KONIC design, resulting in minimisation of cross axis error, is particularly advantageous for three axis measurement integrity.
25, 25, 28
1Hz – 3kHz /- 5%
1Hz – 6 kHz /- 10%
-5% @ -50ºC
5% @ 185ºC
Transducer inserts welded bonded into hard anodised al, block
2 x 3.57 mm through holes (A/134/V) 1 x M4 Ø through hole 3 x tapped UNF x 4mm deep (A/134/V-3)
Microdot skt, 10/32 UNF thd.
No Information Available.
Since 1976, Applied Measurement
Australia Pty. Ltd. has taken pride in
providing innovative and effective
solutions for applications that involve
measurement of physical parameters.