ReadStar TT

ReadStar TT The ReadStar TT is a basic, easy to use readout which allows measurement and collection of torque data, with storage of up to 200 readings and built-in torque transducer. The multilingual software and consistent interface ensures ease of use. This product has a variety of modes and can measure […]

ReadStar TT

The ReadStar TT is a basic, easy to use readout which allows measurement and collection of torque data, with storage of up to 200 readings and built-in torque transducer. The multilingual software and consistent interface ensures ease of use.

This product has a variety of modes and can measure track, peak, 1” peak (click) and pulse. Results are shown on an easy read display. Time and date stamped readings can be set to print automatically.

The ReadStar TT can be powered using “C” cells, rechargeable batteries or from the mains. The batteries must be recharged externally to the product, charger not provided. It canalso either be fixed permanently or used as a portable device.

Key Features

  • Accurate and simple to operate
  • Robust but lightweight
  • Tricolour LED indication of torque status
  • 200 date and time stamped reading memory
  • Download to a PC or printer
  • Available in 1, 4, 12 and 30Nm

 

Accuracy ± 0.5% of rated maximum transducer capacity
Overload Capacity 125% of stated maximum transducer capacity
Zero Drift <0.1% of rated maximum transducer capacity
Operating Temperature Range 5 40°
Temperature Stability ± 0.1% per degree Celsius
Sealing IP40
Humidity 5% to 75% non condensing
Serial Interface 9 way female ‘D’ connector
Frequency Response User selectable in 6 steps from 68Hz to 4385Hz
Calibration Issued with calibration certificate traceable to national and international standards.12 months typical recalibration interval
Warranty 12 months parts and labour
Servicing Crane Electronics Ltd offer a full repair facility and calibration to UKAS and international standards
Power Two type ‘C’ cells, rechargeable batteries, main powered(needs optional power supply)
Weight ReadStar II: 0.9KgReadStar TT: 2.3Kg
Construction ABS cover; Steel base
Output Serial dump – no handshaking (USB)
Dimensions ReadStar II: 166mm (W) x 190mm (D) x 66mm (H)ReadStar TT: 166mm (W) x 190mm (D) x 75mm (H)

 

Dimensions ReadStar II: 166mm (W) x 190mm (D) x 66mm (H)ReadStar TT: 166mm (W) x 190mm (D) x 75mm (H)
Operating Temperature Range 5 40°
Temperature Stability ± 0.1% per degree Celsius