Call Us Now! (03) 9874 5777Contact Us
For more than ten years we have been occupied with the development and production of high-quality eddy current probes for industry and research. With the new TX Series, eddylab is introducing a fully digital device – incorporating USB, CAN and a high-speed analogue interface. Eddy current probes are particularly suitable devices for non-contact measurements on metallic targets. Typical applications are measurements on rotating shafts for the detection of imbalance, vibration, out-of-roundness, air gap, radial/axial run-out, and much more besides. The extremely high resolution up to a level of 50nm enables the smallest of amplitudes to be detected. eddylab probes are designed for temperatures up to 185 °C, and are optimised for the entire temperature range with regard to temperature drift.
Range
Linearity max
Resolution
Dynamic
Protection Class max
Operating Temperature
Output
0.5 -10 mm
/- 0.15 %
0.03 µm
124 kS/s
IP68
up to 185 °C
0…10 V, 0…5 V, ±5 V, 0…20 mA, 4…20 mA, USB, CAN
The powerful windows software is available in three different versions: Lite, Standard and Reference. eddylab is used in conjunction with the TX-Driver, an eddy current sensor and a digital gauge for calibration.
eddylab Lite is delivered with every eddy current sensor.
No Information Available.
Operating Temperature up to 185 °C
Your Name (required)
Your Email (required)
Business Name (required)
Your Phone Number (required)
Subject
Your Message