ATI MULTI-AXIS Force/Torque Sensors

ATI MULTI-AXIS Force/Torque Sensors The ATI Multi-Axis Force/Torque Sensor system measures all six components of force and torque. The system consists of a transducer, shielded high-flex cable, and intelligent data acquisition system, Ethernet/DeviceNet interface or F/T controller. Force/Torque sensors are used throughout industry for product testing, robotic assembly, grinding and […]

ATI MULTI-AXIS Force/Torque Sensors

The ATI Multi-Axis Force/Torque Sensor system measures all six components of force and torque. The system consists of a transducer, shielded high-flex cable, and intelligent data acquisition system, Ethernet/DeviceNet interface or F/T controller. Force/Torque sensors are used throughout industry for product testing, robotic assembly, grinding and polishing. In research, our sensors are used in robotic surgery, haptics, rehabilitation, neurology and many others applications.

For full product list and all specifications on all products check the downloads tab or
click here

Nano17Ti (Titanium Nano17)

Product Advantages

Our Smallest 6-axis Sensor Now Available in a Titanium Version:
The Nano17Ti fits into restricted spaces of research applications and is
non-ferrous.

Extremely High Strength:

  • EDM wire-cut from grade 5 titanium.
  • Maximum allowable single-axis overload values are 4.9 to 19.6 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75
times stronger than conventional foil gages. This signal is amplified,
resulting in near-zero noise distortion.
Typical Applications

  • Biomechanical research
  • Measurements in highly magnetic environments
SENSING RANGES Calibrations
Axes US-1.8-0.4 US-3.6-0.8 US-7.2-1.6
Fx, Fy (±lbf) 1.8 3.6 7.2
Fz (±lbf) 3.15 6.3 12.6
Tx, Ty (±lbf-in) 0.4 0.8 1.6
Tz (±lbf-in) 0.4 0.8 1.6
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/1514 1/3028 1/757 1/1514 2/757 1/757
Fz (lbf) 2/1721 1/1721 5/2151 2/1721 10/2151 5/2151
Tx, Ty (lbf-in) 2/13743 1/13743 10/34357 2/13743 5/8589 10/34357
Tz (lbf-in) 1/5215 1/10430 2/5215 1/5215 10/13037 2/5215
SENSING RANGES Calibrations
Axes SI-8-0.05 SI-16-0.1 SI-32-0.2
Fx, Fy (±N) 8 16 32
Fz (±N) 14.1 28.2 56.4
Tx, Ty (±Nmm) 50 100 200
Tz (±Nmm) 50 100 200
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/341 1/682 2/341 1/341 2/171 1/171
Fz (N) 1/341 1/682 2/341 1/341 2/171 1/171
Tx, Ty (Nmm) 3/182 3/364 3/91 3/182 3/46 3/92
Tz (Nmm) 5/364 5/728 5/182 5/364 5/92 5/184
Nano17

Product Advantages

One of the Smallest 6-axis Sensors in the World: The Nano17 fits into restricted spaces of research applications. Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable single-axis overload values are 3.1 to 13.8 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

IP65 and IP68 (4m) Versions Available: The IP65 version of the transducer is available for use in wet environments. The IP68 version is for underwater environments to a maximum depth of 4 meters in fresh water. Contact ATI Industrial Automation for drawings and more information.

SENSING RANGES Calibrations
Axes US-3-1 US-6-2 US-12-4
Fx, Fy (±lbf) 3 6 12
Fz (±lbf) 4.25 8.5 17
Tx, Ty (±lbf-in) 1 2 4
Tz (±lbf-in) 1 2 4
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/640 1/1280 1/320 1/640 1/160 1/320
Fz (lbf) 1/640 1/1280 1/320 1/640 1/160 1/320
Tx, Ty (lbf-in) 1/4000 1/8000 1/2000 1/4000 1/1000 1/2000
Tz (lbf-in) 1/4000 1/8000 1/2000 1/4000 1/1000 1/2000
SENSING RANGES Calibrations
Axes SI-12-0.12 SI-25-0.25 SI-50-0.5
Fx, Fy (±N) 12 25 50
Fz (±N) 17 35 70
Tx, Ty (±Nmm) 120 250 500
Tz (±Nmm) 120 250 500
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/160 1/320 1/80 1/160 1/40 1/80
Fz (N) 1/160 0 1/320 1/80 1/160 1/40 1/8
Tx, Ty (Nmm) 1/32 1/64 1/16 1/32 1/8 1/16
Tz (Nmm) 1/32 1/64 1/16 1/32 1/8 1/16
Nano25

Product Advantages

One of the Smallest 6-axis Sensors in the World: The Nano25 fits into restricted spaces of research applications.

Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable single-axis overload values are 7.1 to 15.1 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

IP65 and IP68 (4m) Versions Available: The IP65 version of the transducer is available for use in wet environments. The IP68 version is for underwater environments to a maximum depth of 4 meters in fresh water. Contact ATI Industrial Automation for drawings and more information.

SENSING RANGES Calibrations
Axes US-25-25 US-50-50
Fx, Fy (±lbf) 25 50
Fz (±lbf) 100 200
Tx, Ty (±lbf-in) 25 50
Tz (±lbf-in) 25 30
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/112 1/224 1/56 1/112
Fz (lbf) 3/112 3/224 3/56 3/112
Tx, Ty (lbf-in) 1/80 1/160 1/40 1/80
Tz (lbf-in) 1/160 1/320 1/80 1/160
SENSING RANGES Calibrations
Axes SI-125-3 SI-250-6
Fx, Fy (±N) 125 250
Fz (±N) 500 1000
Tx, Ty (±Nm) 3 6
Tz (±Nm) 3 3.4
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/24 1/48 1/12 1/24
Fz (N) 1/8 1/16 1/4 1/8
Tx, Ty (Nm) 1/660 1/1320 1/330 1/660
Tz (Nm) 1/1320 1/2640 1/660 1/1320
Nano43

Product Advantages

One of the Smallest 6-axis Sensors in the World: The Nano43 fits into restricted spaces of research applications and allows linkages and cables to pass through its center hole.

Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable single-axis overload values are 6.4 to 14.2 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

SENSING RANGES Calibrations
Axes US-4-2 US-8-4
Fx, Fy (±lbf) 4 8
Fz (±lbf) 4 8
Tx, Ty (±lbf-in) 2 4
Tz (±lbf-in) 2 4
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/580 1/1160 1/290 1/580
Fz (lbf) 1/580 1/1160 1/290 1/580
Tx, Ty (lbf-in) 1/1160 1/2320 1/580 1/1160
Tz (lbf-in) 1/1160 1/2320 1/580 1/1160
SENSING RANGES Calibrations
Axes SI-18-0.25 SI-36-0.5
Fx, Fy (±N) 18 36
Fz (±N) 18 36
Tx, Ty (±Nmm) 250 500
Tz (±Nmm) 250 500
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/128 1/256 1/64 1/128
Fz (N) 1/128 1/256 1/64 1/128
Tx, Ty (Nmm) 1/10 1/20 1/5 1/10
Tz (Nmm) 1/10 1/20 1/5 1/10
Mini40

Product Advantages

One of the Smallest 6-axis Sensors in the World: The Mini40 has a compact, low-profile design.
Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable single-axis overload values are 4.2 to 18.9 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

SENSING RANGES Calibrations
Axes US-5-10 US-10-20 US-20-40
Fx, Fy (±lbf) 5 10 20
Fz (±lbf) 15 30 60
Tx, Ty (±lbf-in) 10 20 40
Tz (±lbf-in) 10 20 40
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/400 1/800 1/200 1/400 1/100 1/200
Fz (lbf) 1/200 1/400 1/100 1/200 1/50 1/100
Tx, Ty (lbf-in) 1/400 1/800 1/200 1/400 1/100 1/200
Tz (lbf-in) 1/400 1/800 1/200 1/400 1/100 1/200
SENSING RANGES Calibrations
Axes SI-20-1 SI-40-2 SI-80-4
Fx, Fy (±N) 20 40 80
Fz (±N) 60 120 240
Tx, Ty (±Nm) 1 2 4
Tz (±Nm) 1 2 4
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/100 1/200 1/50 1/100 1/25 1/50
Fz (N) 1/50 1/100 1/25 1/50 2/25 1/25
Tx, Ty (Nm) 1/4000 1/8000 1/2000 1/4000 1/1000 1/2000
Tz (Nm) 1/4000 1/8000 1/2000 1/4000 1/1000 1/2000
Mini45

Product Advantages

One of the Smallest 6-axis Sensors in the World: The Mini45 has a compact, low-profile design with a through-hole to allow passage of linkages or cables.

Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable single-axis overload values are 5.7 to 25.3 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

SENSING RANGES Calibrations
Axes US-30-40 US-60-80 US-120-160
Fx, Fy (±lbf) 30 60 120
Fz (±lbf) 60 120 240
Tx, Ty (±lbf-in) 40 80 160
Tz (±lbf-in) 40 80 160
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/40 1/80 1/20 1/40 1/10 1/20
Fz (lbf) 1/40 1/80 1/20 1/40 1/10 1/20
Tx, Ty (lbf-in) 1/44 1/88 1/22 1/44 1/11 1/22
Tz (lbf-in) 1/88 1/176 1/44 1/88 1/22 1/44
SENSING RANGES Calibrations
Axes SI-145-5 SI-290-10 SI-580-20
Fx, Fy (±N) 145 290 580
Fz (±N) 290 580 1160
Tx, Ty (±Nm) 5 10 20
Tz (±Nm) 5 10 20
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/8 1/16 1/4 1/8 1/2 1/4
Fz (N) 1/8 1/16 1/4 1/8 1/2 1/4
Tx, Ty (Nm) 1/376 1/752 1/188 1/376 1/94 1/188
Tz (Nm) 1/752 1/1504 1/376 1/752 1/188 1/376
Mini58

Product Advantages

Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable overload values are 4.9 to 21 times rated capacities.
  • Through-hole to allow passage of linkages or cables

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

SENSING RANGES Calibrations
Axes US-150-250 US-300-500 US-600-1000
Fx, Fy (±lbf) 150 300 600
Fz (±lbf) 375 750 1500
Tx, Ty (±lbf-in) 250 500 1000
Tz (±lbf-in) 250 500 1000
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/14 1/28 1/7 1/14 2/7 1/7
Fz (lbf) 1/8 1/16 1/4 1/8 1/2 1/4
Tx, Ty (lbf-in) 1/12 1/24 1/6 1/12 1/3 1/6
Tz (lbf-in) 1/20 1/40 1/10 1/20 1/5 1/10
SENSING RANGES Calibrations
Axes SI-700-30 SI-1400-60 SI-2800-120
Fx, Fy (±N) 700 1400 2800
Fz (±N) 1700 3400 6800
Tx, Ty (±Nm) 30 60 120
Tz (±Nm) 30 60 120
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/4 1/8 1/2 1/4 1 1/2
Fz (N) 1/2 1/4 1 1/2 2 1
Tx, Ty (Nm) 1/100 1/200 1/50 1/100 1/25 1/50
Tz (Nm) 1/160 1/320 1/80 1/160 1/40 1/80
Mini85

Product Advantages

Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable overload values are 5.9 to 24.9 times rated capacities.
  • Through-hole available as a special order option.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

Typical Applications

  • Telerobotics
  • Humanoid robots
  • Rehabilitation research
  • Prosthetics research
SENSING RANGES Calibrations
Axes US-105-185 US-210-370 US-420-740
Fx, Fy (±lbf) 105 210 420
Fz (±lbf) 210 420 840
Tx, Ty (±lbf-in) 185 370 740
Tz (±lbf-in) 185 370 740
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/26 1/52 5/64 5/128 5/32 5/64
Fz (lbf) 7/130 7/260 3/32 3/64 3/16 3/32
Tx, Ty (lbf-in) 5/84 5/168 5/42 5/84 5/21 5/42
Tz (lbf-in) 1/24 1/48 1/12 1/24 1/6 1/12
SENSING RANGES Calibrations
Axes SI-475-20 SI-950-40 SI-1900-80
Fx, Fy (±N) 475 950 1900
Fz (±N) 950 1900 3800
Tx, Ty (±Nm) 20 40 80
Tz (±Nm) 20 40 80
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 9/56 9/112 9/28 9/56 9/14 9/28
Fz (N) 3/14 3/28 3/7 3/14 6/7 3/7
Tx, Ty (Nm) 5/748 5/1496 5/374 5/748 5/187 5/374
Tz (Nm) 7/1496 7/2992 7/748 7/1496 7/374 7/748
Gamma

Product Advantages

Extremely High Strength:

  • Precision machined from high-strength aircraft aluminum.
  • Maximum allowable single-axis overload values are 6.9 to 31.6 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

IP60, IP65 and IP68 (4m) Versions Available: An IP60 version is for use in dusty environments. The IP65 version of the transducer provides protection against water spray. The IP68 version is for underwater environments to a maximum depth of 4 meters in fresh water. Contact ATI Industrial Automation for drawings and more information.

SENSING RANGES Calibrations
Axes US-7.5-25 US-15-50 US-30-100
Fx, Fy (±lbf) 7.5 15 30
Fz (±lbf) 25 50 100
Tx, Ty (±lbf-in) 25 50 100
Tz (±lbf-in) 25 50 100
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/320 1/640 1/160 1/320 1/80 1/160
Fz (lbf) 1/160 1/320 1/80 1/160 1/40 1/80
Tx, Ty (lbf-in) 1/160 1/320 1/80 1/160 1/40 1/80
Tz (lbf-in) 1/160 1/320 1/80 1/160 1/40 1/80
SENSING RANGES Calibrations
Axes SI-32-2.5 SI-65-5 SI-130-10
Fx, Fy (±N) 32 65 130
Fz (±N) 100 200 400
Tx, Ty (±Nm) 2.5 5 10
Tz (±Nm) 2.5 5 10
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/80 1/160 1/40 1/80 1/20 1/40
Fz (N) 1/40 1/80 1/20 1/40 1/10 1/20
Tx, Ty (Nm) 1/1000 1/2000 5/3333 10/13333 1/400 1/800
Tz (Nm) 1/1000 1/2000 5/3333 10/13333 1/400 1/800
Delta

Product Advantages

Extremely High Strength:

  • Precision machined from high-strength aircraft aluminum.
  • Maximum allowable single-axis overload values are 4.1 to 18.8 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

IP60, IP65 and IP68 (10m) Versions Available: An IP60 version is for use in dusty environments. The IP65 version of the transducer provides protection against water spray. The IP68 version is for underwater environments to a maximum depth of 10 meters in fresh water. Contact ATI Industrial Automation for drawings and more information.

SENSING RANGES Calibrations
Axes US-50-150 US-75-300 US-150-600
Fx, Fy (±lbf) 50 75 150
Fz (±lbf) 150 225 450
Tx, Ty (±lbf-in) 150 300 600
Tz (±lbf-in) 150 300 600
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/64 1/128 1/32 1/64 1/16 1/32
Fz (lbf) 1/32 1/64 1/16 1/32 1/8 1/16
Tx, Ty (lbf-in) 3/64 3/128 3/32 3/64 3/16 3/32
Tz (lbf-in) 1/32 1/64 1/16 1/32 1/8 1/16
SENSING RANGES Calibrations
Axes SI-165-15 SI-330-30 SI-660-60
Fx, Fy (±N) 165 330 660
Fz (±N) 495 990 1980
Tx, Ty (±Nm) 15 30 60
Tz (±Nm) 15 30 60
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/16 1/32 1/8 1/16 1/4 1/8
Fz (N) 1/8 1/16 1/4 1/8 1/2 1/4
Tx, Ty (Nm) 1/264 1/528 10/1333 5/1333 5/333 10/1333
Tz (Nm) 1/264 1/528 10/1333 5/1333 5/333 10/1333
Theta

Product Advantages

Extremely High Strength:

  • Precision machined from high-strength stainless steel.
  • Maximum allowable single-axis overload values are 4.3 to 15.5 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

IP60, IP65 and IP68 (10m) Versions Available: An IP60 version is for use in dusty environments. The IP65 version of the transducer provides protection against water spray. The IP68 version is for underwater environments to a maximum depth of 10 meters in fresh water. Contact ATI Industrial Automation for drawings and more information.

SENSING RANGES Calibrations
Axes US-200-1000 US-300-1800 US-600-3600
Fx, Fy (±lbf) 200 300 600
Fz (±lbf) 500 875 1500
Tx, Ty (±lbf-in) 1000 1800 3600
Tz (±lbf-in) 1000 1800 3600
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net.DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/16 1/32 5/34 5/68 1/4 1/8
Fz (lbf) 1/8 1/16 5/17 5/34 1/2 1/4
Tx, Ty (lbf-in) 1/4 1/8 5/8 5/16 1 1/2
Tz (lbf-in) 1/4 1/8 5/8 5/16 1 1/2
SENSING RANGES Calibrations
Axes SI-1000-120 SI-1500-240 SI-2500-400
Fx, Fy (±N) 1000 1500 2500
Fz (±N) 2500 3750 6250
Tx, Ty (±Nm) 120 240 400
Tz (±Nm) 120 240 400
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/2 1/4 1 1/2 1 1/2
Fz (N) 1/2 1/4 1 1/2 2 1
Tx, Ty (Nm) 1/20 1/40 1/10 1/20 1/10 1/20
Tz (Nm) 1/40 1/80 1/20 1/40 1/10 1/20
Omega85

Product Advantages

Extremely High Strength:

  • Precision machined from high-strength stainless steel.
  • Maximum allowable single-axis overload values are 5.9 to 24.9 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

IP65 and IP68 (10m) Versions Available: The IP65 version of the transducer provides protection against water spray. The IP68 version is for underwater environments to a maximum depth of 10 meters in fresh water. Contact ATI Industrial Automation for drawings and more information.

SENSING RANGES Calibrations
Axes US-105-185 US-210-370 US-420-740
Fx, Fy (±lbf) 105 210 420
Fz (±lbf) 210 420 840
Tx, Ty (±lbf-in) 185 370 740
Tz (±lbf-in) 185 370 740
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net.DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/26 1/52 5/64 5/128 5/32 5/64
Fz (lbf) 3/65 3/130 3/32 3/64 3/16 3/32
Tx, Ty (lbf-in) 3/56 3/112 3/28 3/56 3/14 3/28
Tz (lbf-in) 1/24 1/48 1/12 1/24 1/6 1/12
SENSING RANGES Calibrations
Axes SI-475-20 SI-950-40 SI-1900-80
Fx, Fy (±N) 475 950 1900
Fz (±N) 950 1900 3800
Tx, Ty (±Nm) 20 40 80
Tz (±Nm) 20 40 80
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/7 1/14 2/7 1/7 4/7 2/7
Fz (N) 3/14 3/28 3/7 3/14 6/7 3/7
Tx, Ty (Nm) 5/748 5/1496 5/374 5/748 5/187 5/374
Tz (Nm) 7/1496 7/2992 7/748 7/1496 7/374 7/748
Omega160

Product Advantages

Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable single-axis overload values are 4.2 to 15.2 times rated capacities.
  • Through-hole available in some cases.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

IP60, IP65 and IP68 (10m) Versions Available: An IP60 version is for use in dusty environments. The IP65 version of the transducer provides protection against water spray. The IP68 version is for underwater environments to a maximum depth of 10 meters in fresh water. Contact ATI Industrial Automation for drawings and more information.

SENSING RANGES Calibrations
Axes US-200-1000 US-300-1800 US-600-3600
Fx, Fy (±lbf) 200 300 600
Fz (±lbf) 500 875 1500
Tx, Ty (±lbf-in) 1000 1800 3600
Tz (±lbf-in) 1000 1800 3600
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1/16 1/32 5/34 5/68 1/4 1/8
Fz (lbf) 1/8 1/16 5/17 5/34 1/2 1/4
Tx, Ty (lbf-in) 1/4 1/8 5/8 5/16 1 1/2
Tz (lbf-in) 1/4 1/8 5/8 5/16 1/2 1/4
SENSING RANGES Calibrations
Axes SI-1000-120 SI-1500-240 SI-2500-400
Fx, Fy (±N) 1000 1500 2500
Fz (±N) 2500 3750 6250
Tx, Ty (±Nm) 120 240 400
Tz (±Nm) 120 240 400
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 1/2 1/4 1/2 1/4 1 1/2
Fz (N) 1/2 1/4 1 1/2 1 1/2 3/4
Tx, Ty (Nm) 1/20 1/40 1/10 1/20 1/10 1/20
Tz (Nm) 1/40 1/80 1/20 1/40 1/10 1/20
Omega190

Product Advantages

Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable single-axis overload values are 4.8 to 19.9 times rated capacities.
  • Through-hole available in some cases.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.
IP60, IP65 and IP68 (10m) Versions Available: An IP60 version is for use in dusty environments. The IP65 version of the transducer provides protection against water spray. The IP68 version is for underwater environments to a maximum depth of 10 meters in fresh water. Contact ATI Industrial Automation for drawings and more information.

SENSING RANGES Calibrations
Axes US-400-3000 US-800-6000 US-1600-12000
Fx, Fy (±lbf) 400 800 1600
Fz (±lbf) 1000 2000 4000
Tx, Ty (±lbf-in) 3000 6000 12000
Tz (±lbf-in) 3000 6000 12000
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 5/32 5/64 5/16 5/32 5/8 5/16
Fz (lbf) 5/16 5/32 5/8 5/16 1 1/4 5/8
Tx, Ty (lbf-in) 15/16 15/32 1 7/8 15/16 3 3/4 1 7/8
Tz (lbf-in) 5/8 5/16 1 1/4 5/8 2 1/2 1 1/4
SENSING RANGES Calibrations
Axes SI-1800-350 SI-3600-700 SI-7200-1400
Fx, Fy (±N) 1800 3600 7200
Fz (±N) 4500 9000 18000
Tx, Ty (±Nm) 350 700 1400
Tz (±Nm) 350 700 1400
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 3/4 3/8 1 1/2 3/4 3 1 1/2
Fz (N) 1 1/2 3/4 3 1 1/2 6 3
Tx, Ty (Nm) 5/48 5/96 5/24 5/48 5/12 5/24
Tz (Nm) 5/72 5/144 5/36 5/72 5/18 5/36
Omega250

Product Advantages

Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable single-axis overload values are 10.1 to 40.8 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.
IP60 (Standard), IP65 and IP68 (10m) Versions Available: An IP60 version is for use in dusty environments and is standard on this model. An IP65 version of the transducer provides protection against water spray. The IP68 version is for underwater environments to a maximum depth of 10 meters in fresh water. Contact ATI Industrial Automation for drawings and more information.

SENSING RANGES Calibrations
Axes US-900-4500 US-1800-9000 US-3600-18000
Fx, Fy (±lbf) 900 1800 3600
Fz (±lbf) 1800 3600 7200
Tx, Ty (±lbf-in) 4500 9000 18000
Tz (±lbf-in) 4500 9000 18000
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1 1/2 2 1 5 2
Fz (lbf) 1 1/2 2 1 5 2
Tx, Ty (lbf-in) 2 1 5 2 10 5
Tz (lbf-in) 2 1 5 2 10 5
SENSING RANGES Calibrations
Axes SI-4000-500 SI-8000-1000 SI-16000-2000
Fx, Fy (±N) 4000 8000 16000
Fz (±N) 8000 16000 32000
Tx, Ty (±Nm) 500 1000 2000
Tz (±Nm) 500 1000 2000
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (N) 2 1 5 2 10 5
Fz (N) 4 2 10 4 20 10
Tx, Ty (Nm) 1/4 1/8 1/2 1/4 1 1/2
Tz (Nm) 1/4 1/8 1/2 1/4 1 1/2
Omega331

Product Advantages

Extremely High Strength:

  • EDM wire-cut from high yield-strength stainless steel.
  • Maximum allowable single-axis overload values are 5.3 to 21.8 times rated capacities.

High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.
IP65 Version Available: The IP65 version of the transducer provides protection against water spray. Contact ATI Industrial Automation for drawings and more information.

SENSING RANGES Calibrations
Axes US-2250-13000 US-4500-26000 US-9000-52000
Fx, Fy (±lbf) 2250 4500 9000
Fz (±lbf) 5250 10500 21000
Tx, Ty (±lbf-in) 13000 26000 52000
Tz (±lbf-in) 13000 26000 52000
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (lbf) 1 1/2 2 1 4 2
Fz (lbf) 2 1 4 2 8 4
Tx, Ty (lbf-in) 7 1/2 3 3/4 15 7 1/2 30 15
Tz (lbf-in) 3 3/4 1 7/8 7 1/2 3 3/4 15 7 1/2
SENSING RANGES Calibrations
Axes SI-10000-1500 SI-20000-3000 SI-40000-6000
Fx, Fy (±N) 10000 20000 40000
Fz (±N) 22000 44000 88000
Tx, Ty (±Nm) 1500 3000 6000
Tz (±Nm) 1500 3000 6000
RESOLUTION System Type*
Axes CTL Net/DAQ CTL Net/DAQ CTL Net/DAQ
Fx, Fy (kN) 1/240 1/480 1/120 1/240 1/60 1/120
Fz (kN) 1/120 1/240 1/60 1/120 1/30 1/60
Tx, Ty (kNm) 3/4000 3/8000 3/2000 3/4000 3/1000 3/2000
Tz (kNm) 3/8000 3/16000 3/4000 3/8000 3/2000 3/4000

 

No Information Available.

No Information Available.