i420 Series Data Acquisition Cards

i420 Series Data Acquisition Cards

• The i420 card plugs into a 4 to 16 slot instruNet i4xx Card Cage, which in turn attaches to a Windows computer
• 20se/10di Voltage Input Channels
• 4x Universal Digital I/O (20mA sink, -10V..30V)
• Connect Directly To Sensors: Voltage,  Thermocouple,  Thermistor,  RTD,  Load Cell,  Strain Gage,  Potentiometer,  Current,  Resistance
• Additional i43x A/D module required to measure voltages

Product Summary

• This Amplifier (not A/D) module provides 20se/10di voltage input channels (Ch#1…#20)⁴⁰ , each of which are independently software programmable with Windows software that support the direct connection to many common sensor types
• This module does not contain an A/D converter, and therefore internally routes measured voltage to an i43x A/D module anywhere in card cage. At least one i43x must be installed in order to measure a voltage with this module.
• Voltage input range on each channel is independently software programmable to one of: ±20mV, ±40mV, ±80mV, ±2.5V, ±5V, ±10V, 0 to 5V, 0 to 10V
• Each channel provides the following software programmable parameters: A/D Signal-Averaging-Per-Point (0 … 100mSec)³ , Sample-Rate (samples-per-second-per-channel)¹⁷ , Digital IIR Filter (LowPass, HighPass, BandPass, or BandStop)⁵⁵ , Voltage Measurement Range (±20mV…±10V)¹ , Sensor Type¹³ , and Single-Ended or Differential Wiring