Jewell Model 906 Little Dipper In-Place Inclinometer

Jewell Model 906 Little Dipper In-Place Inclinometer Little Dipper is an in-place inclinometer system for monitoring slopes, embankments, deep excavations, tunnels, tank foundations, retaining walls and other types of ground movement. Installed as a string of vertical or horizontal sensors inside inclinometer casing, or by direct burial, this instrument provides […]

Jewell Model 906 Little Dipper In-Place Inclinometer

Little Dipper is an in-place inclinometer system for monitoring slopes, embankments, deep excavations, tunnels, tank foundations, retaining walls and other types of ground movement. Installed as a string of vertical or horizontal sensors inside inclinometer casing, or by direct burial, this instrument provides a continuous record of ground displacement. Fiberglass rods connect the sensors inside the casing, and fins or universal pivots couple the sensors to the casing walls. Little Dipper’s on-board electronics accept a wide input voltage range and drive long cables without signal loss. The waterproof and non-corrodible ABS sensor housing also makes the Little Dipper a popular tool for underwater tilt measurements in shallow marine applications. Select analog voltage output (biaxial) or 4-20 mA output (uniaxial only).

Range ±12°/±30°
Resolution 0.005°/0.01°
Output ±3.0 VDC or 4-20 mA
Power Requirement 8 to 24 VDC @ 7mA (voltage output)
~12 – 29 VDC (4-20 mA output)
Temperature Range 241 x 39 mm
Dimensions 241 x 39 mm
Housing ABS polymer, 5 atmospheres pressure rating

 

No Information Available.

241 x 39 mm