Call Us Now! (03) 9874 firstname.lastname@example.org
P114 Submersible Stand Alone Linear Position Sensor The P114 LIPS® (Linear Inductive Position Sensor) is an affordable, durable, high-accuracy position sensor. Derived from the P101, the P114 was designed for industrial and scientific feedback applications where the equipment is submerged, shares many of the desirable features such as compact size. […]
The P114 LIPS® (Linear Inductive Position Sensor) is an affordable, durable, high-accuracy position sensor. Derived from the P101, the P114 was designed for industrial and scientific feedback applications where the equipment is submerged, shares many of the desirable features such as compact size.
The P114, like all Positek sensors, provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 50 to 600mm and with full EMC protection built in. The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance. Derived from the popular P101, the P114 has been designed for applications where the sensor may be completely submerged in water up to a pressure of 10Bar, but good sensor performance and cost are still important.
Intrinsically Safe systems provide a safe operating environment for personnel and equipment. Intrinsic Safety (IS) is based on the principle of restricting the electrical energy transmitted into a hazardous area, thereby ensuring that any sparks or heated surfaces that may occur as a result of electrical failures are insufficient to cause ignition. The threat of an explosion is eliminated.
Positek’s ATEX and IECEx approved Intrinsically Safe sensors can be used in hazardous environments when connected to our approved galvanically isolated amplifier. Positek offers Intrinsically Safe sensors for the following three hazard classifications:
Positek sensors are now available in the EX07 versions which are ATEX and IECEx
Qualified to Intrinsic Safety Specification
The sensors must be used with a galvanically isolated three port amplifier
designed to supply the sensor with a nominal 5V and to transmit the buffered
output to a safe area.
The Positek X005 Galvanic Isolation Amplifier designed specifically for use with Positek Intrinsically safe sensor range is available in the following output options:
Your Name (required)
Your Email (required)
Phone No (required)
Company Name (required)
Since 1976, Applied Measurement
Australia Pty. Ltd. has taken pride in
providing innovative and effective
solutions for applications that involve
measurement of physical parameters.