P503 Flat Rotary Sensor Assembly

P503 Flat Rotary Sensor Assembly The P503 RIPS® (Rotary Inductive Position Sensor) is a low-cost assembly designed particularly for OEM users. Like all Positek sensors it provides a linear output proportional with angle of rotation. Each unit is supplied with the output calibrated to the angle required by the customer, […]

P503 Flat Rotary Sensor Assembly

The P503 RIPS® (Rotary Inductive Position Sensor) is a low-cost assembly designed particularly for OEM users.
Like all Positek sensors it provides a linear output proportional with angle of rotation. Each unit is supplied with the output calibrated to the angle required by the customer, between 16 and 160 degrees.
With suitable mounting and bearings, overall performance, repeatability and stability are outstanding over a wide temperature range.
This very compact sensor, supplied as a printed circuit board sub-assembly, has a range of electrical options.
The P503 is ready to mount directly in customer’s equipment. Connections to the sensor are made via solder pins.

Dimensions
Board Outline Standard 56x32x6mm
Board Outline Buffered 56x32x12.5mm
Shaft 31mm, OD 6mm
Measurement range Any angle from ±10° to ±80°
Independant Linearity <±0.5% up to 100° – typical ±0.25°
Temperature Coefficient <±0.01%/°C Gain & <±0.01%FS/°C Offset
Output Characteristics
Resolution Infinite
Noise <0.02% FSO
Shaft Torque <20mNm Static
Frequency Response >10KHz (-3dB);
>300Hz (-3dB); 2 wire 4-20mA
Output Signal and Output Load
Output Signal Output Load
0.5 to 4.5 V dc ratiometric 5K Ohms min
0.5 to 4.5 V dc 5K Ohms min
± 5V dc 5K Ohms min
± 10V dc 5K Ohms min
0.5 to 9.5 V dc 5K Ohms min
4 to 20mA (2 wire) 300 Ohms @ 24V
4 to 20mA (3 wire sink) 950 Ohms @ 24V
4 to 20mA (3 wire source) 300 Ohms Max
Supply Current
12 mA Typical 20 mA max. (Voltage Versions)
Temperature Limits
Operating -40 to 125°C (5V input only)
-20 to 85°C
Storage -40 to 125°C
Vibration IEC 68-2-6: 10g
Shock IEC 68-2-29: 40 g
MTBF 350,000 hrs 40°C Gf
Sealing Unsealed
Electrical Connections Solder pins

Dimensions
Board Outline Standard 56x32x6mm
Board Outline Buffered 56x32x12.5mm
Shaft 31mm, OD 6mm
Measurement range Any angle from ±10° to ±80°
Independant Linearity <±0.5% up to 100° – typical ±0.25°
Temperature Coefficient <±0.01%/°C Gain & <±0.01%FS/°C Offset
Output Characteristics
Resolution Infinite
Noise <0.02% FSO
Shaft Torque <20mNm Static
Frequency Response >10KHz (-3dB);
>300Hz (-3dB); 2 wire 4-20mA
Temperature Limits
Operating -40 to 125°C (5V input only)
-20 to 85°C
Storage -40 to 125°C
Vibration IEC 68-2-6: 10g
Shock IEC 68-2-29: 40 g
MTBF 350,000 hrs 40°C Gf
Sealing Unsealed
Electrical Connections Solder pins