P9000 Series Pressure Transducer

P9000 Series Pressure Transducer Description: The P9000 Series is a range of advanced, digitally compensated pressure transducers. The unique design of the P9000 pressure transducer utilizes the proven reliability of strain gauge technology and innovative digital compensation electronics. The synergy of these technologies results in an instrument grade pressure transducer. Available […]

P9000 Series Pressure Transducer

Description: The P9000 Series is a range of advanced, digitally compensated pressure transducers. The unique design of the P9000 pressure transducer utilizes the proven reliability of strain gauge technology and innovative digital compensation electronics. The synergy of these technologies results in an instrument grade pressure transducer. Available in pressure ranges from 75 psi to 10,000 psi (5 bar to 700 bar), the P9000 series can be configured with a variety of pressure ports, electrical outputs, and termination options to meet most pressure sensing needs.

Features:
• Long Term Stability
• High Accuracy
• IP67

Pressure Ranges
High (psi) 0-75, 100, 150, 200, 250, 350, 500, 750, 1000, 1500, 2200, 3500, 5000, 7500, 10,000
(bar) 0-5, 7, 10, 15, 25, 35, 50, 70, 100, 150, 200, 250, 350, 500, 700
DIN (bar) 6, 10, 16, 25, 40, 60, 100, 160, 250, 400, 600
Pressure References
High Pressure Range Vented gauge 1: 0-75 to 0-350 psi
Absolute and sealed gauge:  0-75 to 0-10,000 psi
Pressure Limit 5x full range pressure or 12,000 psi (830 bar), whichever is less. Will not cause a zero
offset exceeding 0.04% FRO (recoverable within a few hours)
Burst Pressure 20 x full range pressure or 22,000 psi (1,520 bar), whichever is less
Pressure Media Liquids or gases compatible with 17-4 PH and 17-7 PH stainless steel or Inconel 625

Combined Non-linearity, Hysteresis

and Non-repeatability High Range: <±0.05% F.R.O. (Best Straight Line) Typical, <±0.08%FRO (Best Straight Line) Maximum

Temperature Range

Operable                      -40°F to 212°F (-40°C to 100°C)

Compensated               –4°F to 176°F (-20°C to 80°C)

Storage                        -40°F to 257°F (-40°C to 125°C)

Humidity

Connector Version       95% Relative humidity

Cable Version              Immersible to IP67 (fluid must no enter the ends of the cable)

Acceleration Response Above 500 psi (35 bar) ±0.02% F.R.O./g; below 500 psi (35 bar) ±0.10% F.R.O./g

Vibration                      Surpasses MIL STD810C Method 514-2 Curve L

Shock                          1000 g for 2 msec will not damage the sensor

EMC                             The P940, P950, P960 and P980 and P990 Series are CE marked, and when correctly

installed comply with the EMC Directive 89/336/EEC Generic Standards for Residential

Commercial, Light Industrial and Industrial environments. Note: The P980 Series when

used in Intrinsic Safety applications does not comply with the Industrial environment

directive.

Insulation Resistance 500 MOhm at 50 VDC at 25°C

No Information Available.

No Information Available.