Wheel Center Bore ID Measuring Gauge (RF096-50/70-200-Clb)

Wheel Center Bore ID Measuring Gauge (RF096-50/70-200-Clb) The laser measuring machine is intended for non-contact scanning and inner surface geometry measurement of wheel center bore. The gauge is used on alloy wheel production line as quality control tool. As a result of measurements the following geometric parameters are obtained: inner […]

Wheel Center Bore ID Measuring Gauge (RF096-50/70-200-Clb)

The laser measuring machine is intended for non-contact scanning and inner surface geometry measurement of wheel center bore. The gauge is used on alloy wheel production line as quality control tool.
As a result of measurements the following geometric parameters are obtained:

  • inner diameter,
  • surface profile,
  • roundness.

The device can be adapted for any similar hole (bore) measurement and control task.

Specifications

Name of parameter Value
Measurement range, mm 50…70
Space resolution (points/turnover) 3200
Measurement accuracy, um ±5
Depth of measurement, mm 200
Measurement cycle, no more, s 20
Light source red semiconductor laser, 660 nm wavelength
Output power, mW <1
Laser safety Class 2  (IEC60825-1)
Output interface RS232 (max. 460,8 kbit/s) or RS485 (max. 460,8 kbit/s)
Power supply, V 9 …24
Power consumption, W 3 (standby mode), 20 (scan mode)
Environment resistance:
Enclosure rating IP67
Vibration 20g/10…1000Hz, 6 hours, for each of XYZ axes
Shock 30 g / 6 ms
Operation temperature, °С -10… 60 (-30… 60 for the sensors with in-built heater)
Permissible ambient light, lx 30000
Relative humidity 5-95% (no condensation)
Storage temperature, °С -20… 70
Housing material aluminum
Weight (without cable), gram 4000 gram
2000 gram
Measurement range, mm 50…70
Space resolution (points/turnover) 3200
Measurement accuracy, um ±5
Depth of measurement, mm 200
Measurement cycle, no more, s 20
Operation temperature, °С -10… 60 (-30… 60 for the sensors with in-built heater)
Storage temperature, °С -20… 70