XPM10 Series Pressure Transducer

XPM10 Series Pressure Transducer Description: The XPM10 is a miniature transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. It is made of stainless steel or titanium and is available in standard ranges from 0-1 to 350 bars [15 up to 5000 psi]. […]

XPM10 Series Pressure Transducer

Description: The XPM10 is a miniature transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. It is made of stainless steel or titanium and is available in standard ranges from 0-1 to 350 bars [15 up to 5000 psi]. The XPM10 incorporates Measurement Specialties’ cutting edge SanShiftTM technology, which virtually eliminates zero shifts caused by installation torque. The XPM10’s sensing element is a fully temperature compensated Wheatstone bridge made with high stability micro-machined silicon strain gauges which optimize performance, especially at low ranges and frequencies. An on-board A1 or A2 amplifier for high level output is optionally available for all ranges, and an electrical connector interface is available for the standard low level output version. With many years of experience as a designer and manufacturer of sensors, Measurement Specialties, Inc. has the expertise to customize and/or design sensors for specific uses and testing environments. To meet your needs we also offer complete turnkey systems. Our conditioning electronics can power the sensor, amplify the electronic signal, and display the data digitally. A turnkey measurement system arrives with matched components, formatted, calibrated and ready for your immediate use.

Features:

  • Flush diaphragm
  • Low installation torque sensitivity
  • M10x1 thread
  • High level tension output available
  • For static and dynamic applications


All values are typical at temperature 20±1ºC

Parameters
Operating Temperature Range (OTR) -40 to 120 º C [-40 to 248 ° F]
Compensated Temperature Range (CTR) 0 to 60 º C [32 to 140 ° F]
Zero Shift in CTR <2% F.S. /50 º C [/100 ° F] – <3%  for 1bar [15psi] model
Sensitivity Shift in CTR <2% of reading /50 º C [/100 ° F]
Range (F.S.) See standard ranges table
Tightening Torque
Nominal 5 N.m [44 lbf.in] for ≤5 bar [75 psi] models,
(Zero and sensitivity shift <1%) 10 N.m [88 lbf.in] for other ranges
Maximal 10 N.m [88 lbf.in] for ≤5 bar [75 psi] models,
15 N.m [132 lbf.in] for other ranges
Over-Range
Without Damage 2x F.S.
Without Destruction 5x F.S.
Accuracy
Linearity ±0.25% F.S. for ³ 1bar [15psi] model
±0.35% F.S. for 1bar [15psi] model
Hysteresis ±0.25% F.S.
Repeatability ±0.2%F.S.

Electrical Characteristics

Model XPM10 XPM10-A1 XPM10-A2
Supply Voltage 7 10 Vdc 10 to 30 Vdc ±15 Vdc (±12 to ±18 Vdc)
F.S. Output (1 & 2bar models) 6 50 mV 4 V ±5% F.S. 5 V ±5% F.S.
F.S. Output (>2bar model)6 100 mV 4 V ±5% F.S. 5 V ±5% F.S.
Zero Offset <±10 mV 0.5 V ±5% F.S. 0 V ±5% F.S.
Input Impedance/Consumption 500 to 1500 _ <25 mA <25 mA
Output Impedance 500 to 800 _ 1 k_8 1 k_8
Insulation under 50Vdc ≥100 M_ ≥100 M_ ≥100 M_

No Information Available.

No Information Available.