606M2 Series Accelerometer

606M2 Series Accelerometer Description: The Model 606M2 is an IEPE triaxial seat pad accelerometer designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The seat pad incorporates a removable triaxial IEPE accelerometer with 100mV/g output sensitivity. The model 606M2 is designed for low frequency measurements […]

606M2 Series Accelerometer

Description: The Model 606M2 is an IEPE triaxial seat pad accelerometer designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The seat pad incorporates a removable triaxial IEPE accelerometer with 100mV/g output sensitivity. The model 606M2 is designed for low frequency measurements with a measurement resolution of <0.4mg. A detachable 10ft cable is includes with three BNC connectors for simple interface.

Features:

  • Seat Pad Accelerometer
  • Removable IEPE Triaxial Accelerometer
  • Replaceable Cable
  • ISO 10326-1 Configuration
  • Low Frequency Response
  • ±50g Dynamic Range
Parameters
DYNAMIC Notes
Range (g) ±50
Sensitivity (mV/g) 100 ±10%
Frequency Response (Hz) 0.5-1000 ±5%
Natural Frequency (Hz) >25000
Non-Linearity (%FSO) ±1
Transverse Sensitivity (%) <5
Shock Limit (g) 5000
ELECTRICAL
Compliance Voltage (Vdc) 18 to 30
Excitation Current (mA) 2 to 10
Bias Voltage (Vdc) 8 to 12 Room Temperature
Output Impedance (Ω) <100
Full Scale Output Voltage (V) ±5
Residual Noise (g RMS) 0.0004 Broadband 1Hz to 10kHz
Discharge Time Constant (sec) 0.8 to 1.2
ENVIRONMENTAL
Temperature Response (%) <0.17%/°C
Operating Temperature (°C) -20 to 85
Storage Temperature (°C) -20 to 85
Humidity Hermetically Sealed
PHYSICAL
Case Material (Seat Pad) Nitrile Rubber
Case Material (Accelerometer) Titanium
Sensing Element Ceramic (shear mode)
Case Material Titanium
Electrical Connector 3x BNC Connectors
Weight (grams) 350

No Information Available.

No Information Available.