801X-01 Series Accelerometer

801X-01 Series Accelerometers Description: The Model 8011-01 & 8012-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. The accelerometers are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 16kHz. The model 8011-01 features a top exit MIL-C-5015 connector while the […]

801X-01 Series Accelerometers

Description: The Model 8011-01 & 8012-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. The accelerometers are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 16kHz. The model 8011-01 features a top exit MIL-C-5015 connector while the model 8012-01 features an integral cable. The units are hermetically sealed and are designed to operating in temperature ranges from -55°C to 125°C.

Features:

    • ±10g, ±80g & ±500g Dynamic Ranges
    • Wide bandwidth up to 16kHz
    • Case Isolated, Internally Shielded
    • Hermetically Sealed, Welded
    • Annular Shear Mode
    • Reverse Wiring Protection
    • Stable Temperature Response
Parameters
DYNAMIC Notes
Range (g) ±10 ±80 ±500
Sensitivity (mV/g) 500 100 10 ±10% (±5% Option)
Frequency Response (Hz) 1-4000 1-10000 1-10000 ±10%
Frequency Response (Hz) 2 0.5-7000 0.5-16000 0.5-18000 ±3dB
Natural Frequency (Hz) 28000 32000 42000
Non-Linearity (%FSO) ±1 ±1 ±1
Transverse Sensitivity (%) <5 <5 <5
Shock Limit (g) 5000 5000 5000
ELECTRICAL
Compliance Voltage (Vdc) 18 to 30 18 to 30 18 to 30 See Note 1
Excitation Current (mA) 2 to 10 2 to 10 2 to 10
Bias Voltage (Vdc) 8 to 12 8 to 12 8 to 12 Room Temperature
Output Impedance (Ω) <100 <100 <100
Insulation Resistance (MΩ) >100 >100 >100 @100Vdc
Residual Noise (g RMS) 0.00005 0.0001 0.0003
Warm-up Time (sec) <1 <1 <1
Grounding Case Isolated, Internally Shielded
ENVIRONMENTAL
Temperature Response (%) ±5 (see typical temperature response on following page)
Operating Temperature (°C) -55 to 125
Storage Temperature (°C) -55 to 125
PHYSICAL
Sensing Element Ceramic (shear mode)
Case Material Stainless Steel
Weight (grams) 93
Mounting Torque 24 lb-in (2.7 N-m)

1 For full dynamic range a minimum compliance voltage of 24Vdc is recommended 

2 LF option offers a low frequency response to 0.1Hz

3 Contact factory for Hazardous Area Approval options

No Information Available.

Temperature ranges from -55°C to 125°C