Adhesives

Adhesives Denex #3 Datasheet Used in laboratory and transducer applications where low creep is desired. Epoxylite 813 Datasheet Similar to GA-61 but serviceable to higher temperatures. EPY-500 Datasheet Two part, heat curing epoxy adhesive yielding thin glue lines in convenient bi-pak packaging. GC Cement Datasheet For bonding free-filament strain gages […]

Adhesives

Denex #3

Datasheet
 Used in laboratory and transducer applications where low creep is desired.
Epoxylite 813

Datasheet
 Similar to GA-61 but serviceable to higher temperatures.
EPY-500

Datasheet
 Two part, heat curing epoxy adhesive yielding thin glue lines in convenient bi-pak packaging.
GC Cement

Datasheet
 For bonding free-filament strain gages on low-TCE materials.
H Cement

Datasheet
 For bonding free-filament strain gages on metals.
M-Bond 200

Datasheet
 Most widely used general-purpose adhesive. Easiest to handle. Fast room-temperature curing.
M-Bond 300

Datasheet
 Used only when low-temperature cures are necessary.
M-Bond 43B

Datasheet
 Normally used in transducer gaging. Highly resistant to moisture and chemical attack. Elevated-temperature curing. Hard coating with excellent chemical, electrical and mechanical resistance.
M-Bond 450

Datasheet
 Strain Gage Adhesive for Stress Analysis and Transducer Applications
M-Bond 600 Kit

Datasheet
 Similar to 610, but faster curing. Can be cured at lower temperature than 610.
M-Bond 610 Adhesive

Datasheet
 Strain Gage Adhesive for Stress Analysis and Transducer Applications
M-Bond A-12

Datasheet
 Adhesive for use in high elongation applications
M-Bond AE-10

Datasheet
 General-purpose adhesive that is highly resistant to moisture and most chemicals. Room-temperature curing. Hard, water-resistant coating
M-Bond AE-15

Datasheet
 Similar to AE-10. Recommended for more critical applications, including transducer gaging. Elevated-temperature curing. Hard, water-resistant coating
M-Bond GA-2

Datasheet
 Adhesive primarily used on very rough or irregular surfaces. Cures at room temperature.
M-Bond GA-61

Datasheet
 A 100% solids adhesive used to fill irregular surfaces and anchor leadwires. Elevated temperature cure required. Good chemical and mechanical protection at elevated temperatures.
P Adhesive

Datasheet
 Excellent for long term, high temperature use.
PBX Cement

Datasheet
 For bonding free-filament strain gages on metals.
QA-500

Datasheet
 Strain gage adhesive
RTC Epoxy

Datasheet
 For lab and field applications with post-yield, high-elongation strain gages.
Sauereisen DKS-8

Datasheet
 For bonding free element gages on metals.

 

No Information Available.

No Information Available.