PSTR

PSTR S-Type Load Cell

The PSTR tension load cell is made of stainless steel and is ideal for tensile loads and suspended loads, for measuring tensile forces, for dynamometric measurements and as a load limiting device for lifting systems combined with our instruments. The PSTR cell has a 10-meter shielded 4-conductor cable.

Technical Specifications

Rated load RL: 5, 10, 20 t
Combined error: < ±0.03 % RO
Repeatability: ±0,015 % RO
Creep (30 minutes): 0,03 % RO
Safe overload: 150 % RL
Ultimate overload: > 300 % RL
Material: Stainless steel
Degree of protection: IP68
Deflection: 0.3 mm
Compensated Temperature: -10°C ÷ +50°C
Temperature range: -20°C ÷ +70°C
Temperature effect on zero balance: ±0.005 % RO/°C
Temperature effect on output: ±0.003 % RO/°C
Rated output RO: 2 mV/V ±0.1 %
Zero balance: ±1 %
Insulation resistance: > 5000 MOhm
Input resistance: 350 Ohm ±5
Output resistance: 350 ±5 Ohm
Recommended input: 5 ÷ 15 Vdc/ac
Maximum supply voltage: 15 Volt
Cable Lenght: 10 m
Temperature effect on full scale: 0.003% /°C