Call Us Now! (03) 9874 5777Contact Us
Showa Foil Strain Gauges Overview Although there are many machineries and struactures in which we are now living for carrying out a modern social operation, we will not be able to keep a life smoothly and safely unless functions or safety of these facilities be fully ascertained. Showa Strain gauges […]
Although there are many machineries and struactures in which we are now living for carrying out a modern social operation, we will not be able to keep a life smoothly and safely unless functions or safety of these facilities be fully ascertained. Showa Strain gauges have developed and widened the scope of their application as one of the most fundamental means to confirm the degree of safety of machinery and structures we are using and also as the sensors to actually detect and measure strains and stress at the spot.The history of these strain gauges is considerably long and old and the bonded type strain gauges which we are currently using have been designed and schemed initially in 1938 by Simmons & Ruge in America. Our SHOWA Company started manufacture of strain gauges for the first place in Japan in 1962 as the foil grid type strain gauges. Strain gauges are really indispensable means to detect strength and properties of metals, rubber, plastics, ceramics which we are using in our daily life.
Type numbers of strain gauges are determined in accordance with individual meaning in specifications of respective strain gauges. – Click here –
Patterns and Specifications Table of Strain Gauges. – Go to Specifications –
Kinds
Uniaxial Strain Gauges
Biaixal Strain Gauges
Triaxial Strain Gauges
Stress Concentration Measurements
Uniaxial 45°
Diaphragm Type
Crack Detection
Pipe Gauge
Can comply with requirements to be extended to custom built strain gauge patterns for sensor applications. – Click here –
Foil type terminals with glass-epoxy supporting base are ready. – Click here –
We have provisions of adhesives for instantaneous bonding, ambient temperature hardening type, hardened type with heat applied, and so on. – Click here –
Waxes, silicone rubber, and putyl rubber series coating materials are prepared in our stock. – Click here –
In order to obtain the best possible results from a strain gauge installation… – Click here –
Utilize the following factors as the fundamental information in regard to measurements by means of strain gages. – Click here –
Strain Gage Pattern
Type
Nominal Resistance (Ω)
Apporox Gage Fator
Dimension(mm)
Remarks
Grid
Base
Length
Width
120
1.9
0.3
1.8
3.5
2.5
2.0
1.0
1.5
4.0
350
2.4
5.0
1.6
6.0
2.2
7.0
2.1
3.0
2.8
9.5
2.6
11.0
1000
3.2
8.0
13.0
14.0
10.0
15.0
4.5
18.0
6.5
600
16.0
30.0
1.2
40.0
60.0
65.0
5.5
7.5*7.5
12.0*12.0
16.0*16.0
Φ21.0
Φ25.0
Φ6.0
Φ8.0
Φ11.0
Φ15.0
Φ18.0
9.0*9.0
14.0*14.0
Φ24.0
Φ28.0
Φ16.0
Φ10.0
1.0,
12.0
3.6
0.5
0.8
20.0
5.6
—
Φ9.5
Φ13.0
Φ14.0
3.9
26.0
25.0
1
5
27.0
6
36.0
1.7
0.25
0.7
35.0
50.0
55.5
90.0
95.0
7.5
Φ1.0*3.5
Φ1.4*8.0
Φ1.9*11.0
Leadwire pre-attached Strain Gauges
Strain Gauge Pattern
Apporox Gauge Fator
Leadwire Length (m)
3.4
1.3
2.3
25
10
120-
No Information Available.
Your Name (required)
Your Email (required)
Business Name (required)
Your Phone Number (required)
Subject
Your Message