Stationary Transducers

Stationary Transducers Crane’s stationary transducers are the quality choice for the testing of all continuous drive, impulse and hand torque tools in the workshop and production line-side environment. Stationary transducers are used off the production line in workshop or line-side test stations. Combined with joint kits that represent the production […]

Stationary Transducers

Crane’s stationary transducers are the quality choice for the testing of all continuous drive, impulse and hand torque tools in the workshop and production line-side environment.

Stationary transducers are used off the production line in workshop or line-side test stations. Combined with joint kits that represent the production joint condition, the stationary transducers form an effective offline test for verification of assembly tool performance.

Stationary torque transducers form an essential part of the Crane UTA torque system, enabling Plug and Play operation with Crane readout devices. On board intelligence means the UTA transducer is automatically recognised by the Crane readout device, eliminating set-up errors and enabling logging of serial number against measurements for complete traceability. An Industry Standard (IS) version is also available where a user needs the features of the stationary transducer but already has a readout device from another manufacturer.

Key Features

  • Suitable for measurement of all continuous drive, impulse and hand torque tools
  • Automatic tool recognition
  • Combine with joint kits for workshop simulation of hard to soft joints
  • Incorporate into custom built mobile test stations

 

Transducer Type UTA: incorporate data chip enabling automatic transducer recognition operation withCrane readout devicesI.S: ‘Industry Standard’ versionBridge resistance: 350 OhmsSensitivity: 2mV/V
Construction Steel housingOverload capacity: 125% rated torqueSquare drives to ANSI B107-4 -1982; BS4006 – 1992; DIN 3121 – 1987
Connections UTA: 1m integral cable with strain relief; 25-pin ‘D’ port (male) for connection to CELreadoutsI.S: output connector to MIL –C 26482 / BS 9522 FOO 17; shell size 8 -4P
Zero stability < ± 0.1% of FSD/ºC
Static accuracy ±0.25% FSD
Operating Environment Temperature: 5 -40ºC (-10 to 60ºC with reduced specification)Humidity: 10 – 75% non-condensingIngress Protection rating: IP40
Warranty 12 months parts and labour against faulty workmanship or materials
Calibration All torque equipment should be re-calibrated every 12 months

 

No Information Available.

No Information Available.