The new imc Smart Buoy

The intelligent DAQ Smart solution for underwater acoustic monitoring and maritime security.

Listen deeper. Detect faster. Complete underwater asset protection

Combining hydrophone technology with imc ARGUSfit data acquisition and powerful measurement software, imc STUDIO measurement software, and FAMOS data analysis software, the Smart Buoy creates a flexible foundation for underwater surveillance and infrastructure protection.

Protecting critical underwater infrastructure starts with understanding what is happening beneath the surface. The new imc Smart Buoy is an autonomous acoustic data acquisition solution designed to monitor underwater activity, capture high-resolution measurement data, and provide remote access to relevant acoustic information.

Discuss your monitoring requirements
imc_Smart_Buoy
csm_Neon-Banded_Cable_Across_the_Seafloor_ead650f3bb

Subsea communication cables, offshore energy installations, pipelines, and port facilities are essential to modern infrastructure. Potential threats range from accidental damage caused by fishing activities to dragging anchors and deliberate interference.

Yet continuous surveillance is difficult, and traditional monitoring approaches are expensive, limited in coverage or unable to detect subtle threats.

When using underwater acoustic monitoring, engineers and maritime monitoring operators are not only challenged to capture these signals accurately but also to understand what they represent and to identify acoustic patterns within large volumes of continuously recorded measurement.

Collecting the data is only the starting point The challenge is turning acoustic signals into useful information on to identify relevant underwater activity in time.

The key challenges of underwater acoustic data acquisition

Complex acoustic environments:

Overlapping sound sources and changing background noise make individual signals difficult to distinguish.

High data volumes:

Continuous high-resolution acoustic measurements generate substantial amounts of data that must be stored, processed, or transmitted.

Signal identification and classification:

Distinguishing vessel sounds, mechanical activity, and unusual acoustic events requires advanced signal analysis and validated classification methods.

Remote data access:

Offshore and underwater monitoring locations often provide limited communication bandwidth and require autonomous operation.

Long-term measurement reliability:

Continuous acoustic monitoring demands dependable hardware, power management, and data acquisition capabilities.

Meet the imc Smart Buoy: intelligent and autonomous acoustic monitoring beneath the surface.

The imc Smart Buoy brings together underwater sensors, autonomous data acquisition, onboard signal processing, and remote data communication in one configurable monitoring solution.

Saltwater hydrophones capture underwater sound signals, while the imc ARGUSfit measurement platform acquires and processes the data. Relevant measurement information can be transmitted to an onshore monitoring station, where operators can visualize and evaluate underwater acoustic activity.

The concept supports both individual monitoring locations and future networks of interconnected buoys.

smart-buoy_imc_tm_
imc_smart_buoy_system_EN

How the imc Smart Buoy connects underwater sensing with real-time monitoring

imc Smart Buoy system overview: Underwater acoustic signals are captured by hydrophones, processed onboard the buoy, and transmitted to a remote monitoring station for analysis.

Designed for a range of maritime monitoring applications

security_icon_300_x_300_imc

Critical underwater infrastructure protection

Monitor acoustic activity in the vicinity of subsea cables, offshore energy installations, and underwater pipelines to support the early identification of potentially relevant events.

maritie_icon_300_x_300_imc

Naval and maritime security

Establish an acoustic monitoring capability for selected coastal zones, port approaches, and other areas of operational interest.

icon_300_x_300_off_shore_imc

Offshore energy and industrial facilities

Complement existing monitoring infrastructure with continuous underwater acoustic measurements around offshore installations.

R_D_icon_Bouy_300_x_300_imc

Research, development, and sensor integration

Capture high-resolution underwater measurement data, evaluate acoustic signatures, and develop customized monitoring and classification workflows.

How does the imc Smart Buoy work?

One or more hydrophones detect acoustic signals in the surrounding water. The system acquires measurement data for subsequent processing and analysis.

The imc ARGUSfit data acquisition system enables onboard measurement and signal processing. Selected measurement values and calculated acoustic information can be prepared for transmission without continuously transferring all high-resolution raw data.

Communication equipment connects the buoy with a remote monitoring station, where relevant live measurement information is displayed on a dashboard. Processed measurement data is sent via LTE and the MQTT protocol, without requiring a permanent direct connection with the imc STUDIO measurement software that runs on the monitoring station.

On the monitoring station, measurement data is visualized and analyzed using imc software imc STUDIO and FAMOS. High-resolution recordings enable further detailed signal investigations and provide a basis for the development of acoustic detection and classification methods.

With 10 W power consumption, independent of data usage, the imc Smart Buoy supports continous, uninterrupted measurement operation over a long time.

The system concept allows extensions with additional sensors, such as temperature, pressure, and other environmental or operational sensors, depending on the project requirements.

The Smart Buoy concept can be extended into a network of synchronized smart buoys, working as additional measurement stations. Multiple monitoring points could enable wider-area acoustic surveillance and support future event localization methods.

The key characteristics of the imc Smart Buoy components – the saltwater proven hydrophone and the imc ARGUSfit data acquisition system- are scalability and flexibility. The hydrophone can also be supplied as a hydrophone array with multiple hydrophones,while additional sensors or buoy platforms can be connected. The modular design of the imc ARGUSfit allows for a distributed measurement setup and facilitates expansion with additional measurement amplifiers. Therefore, all imc Smart Buoy components can also be applied in other DAQ solutions.

The Smart Buoy concept has already been evaluated using a pilot buoy equipped with an imc ARGUSfit data acquisition system and underwater acoustic sensors. This test verified the  technical feasibility of an ARGUSfit-based autonomous acoustic measurement buoy, including the aspects of continuous underwater measurement, autonomous operation, onboard processing, and remote data transmission.

One integrated system. Multiple measurement capabilities.

Five reasons to consider the imc Smart Buoy

More than an acoustic sensor: A complete measurement and analysis architecture

1. Built around professional data acquisition technology

2. Process data where it is collected

3. Keep access to detailed measurement data

4. Benefit from an integrated measurement ecosystem

5. Adapt system to your
application

This is custom heading element

Discuss your Smart Buoy use case.

Every underwater monitoring environment presents different challenges. Water depth, acoustic background noise, infrastructure layout, monitoring objectives, and available communications can all influence the final design.

Rather than approaching every application with a fixed sensor package, imc supports the development of a measurement architecture tailored to the project’s requirements.

Whether the objective is a single monitoring point, an evaluation campaign, or a future distributed acoustic surveillance network, the first step is understanding the measurement task.