M10 Laser Distance Sensor

M10 Laser Distance Sensor Long distances in speed of light This speed of light sensor with its freely programmable measuring range is particularly suitable for long distances from 0.2 up to 150 meters (8 in. up to 5,900 in.) Further than 30 meters (1,200 in.)with a reflexion foil. The measuring […]

M10 Laser Distance Sensor

Long distances in speed of light

This speed of light sensor with its freely programmable measuring range is particularly suitable for long distances from 0.2 up to 150 meters (8 in. up to 5,900 in.) Further than 30 meters (1,200 in.)with a reflexion foil.
The measuring module is working contactless according to the principle of phase comparison measurement.
With aid of the red pilot beam, the adjustment of the sensor is quite simple.
Inch precise measurement on any surfaces. Two types are available, with a sampling rate of 10 Hz or 50 Hz.
Due to the small light point diameter (from 6 mm) (0.24 in.), measurements in narrow pipes are possible.
The electronics is integrated into the sensor head.
The output of measurement results are served via data interface RS232 (RS 422 optionally). A fieldbus connection is possible.
Preferred areas of application:

height measurement
distance measurement
monitoring (e.g. cranes, transport systems)
fill level measurement (e.g. bulk materials)
position identification
object sensing, -recordal, -control
security application

Measuring range 1 0.2 … 35 m on white and most natural surfaces, up to 150 m possible with target plate
Absolute measuring accuracy 2 ± 2 mm (for ranges up to 35 m); ± 3 mm (for ranges > 35 m)
Repeatability ≤± 0.5 mm over the whole measuring range
Resolution depending on scale factor: 1 mm at SF = 1; 0.001 mm at SF = 1000
Measuring rate 10 Hz or 50 Hz (please state when ordering)
Light source Laser, wave length 650 nm, red visible
< 11 mm at 10 m distance
Light spot diameter < 35 mm at 50 m distance
< 65 mm at 100 m distance
Laser divergence 0.6 mrad
Laser classification ≤ 1 mW under IEC 825-1, laser class 2
RS232 or RS422 (optional), Baudrate 9,6 kBaud, Format 8N1
Interface selection of measuring time, output of measured values, inner temperature,
error codes, single measurement mode
Switching output programmable switching threshold and hysteresis, „high-side-switch“ with 0.5 A load capacity
Analog output programmable distance range, 4…20 mA
Operating temperature -10°C … 50°C
Storage temperature -20°C … 70°C
Supply voltage 10 V … 30 V; <1.5 W (no Alarm)
Connection 12-pol. flange-mount connector (Binder Serie 723)
Dimensions (L x B x H) 212 x 96 x 50 mm, length incl. connector max. 260 mm
Weight approx. 850 g
Protection class IP 65

 

Dimensions (L x B x H) 212 x 96 x 50 mm, length incl. connector max. 260 mm
Operating temperature -10°C … 50°C
Storage temperature -20°C … 70°C